TRIM CLIPS

TRIM CLIPS There are no products in this category.

Subcategories

  • VAG GROUP TRIM FIXINGS...

    Standard tolerance on stated size is +-0.2mm

    Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter

    Please refer to your vehicle's handbook or main dealer for verification of OE reference

  • BMW / CHRYSLER TRIM...

    Standard tolerance on stated size is +-0.2mm

    Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter

    Please refer to your vehicle's handbook or main dealer for verification of OE reference

  • CITROEN / PEUGEOT /...

    Standard tolerance on stated size is +-0.2mm Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter Please refer to your vehicle's handbook or main dealer for verification of OE reference

    Including OMEGA CLIPS

  • DAEWOOD / DIAHATSU /...

    Standard tolerance on stated size is +-0.2mm Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter Please refer to your vehicle's handbook or main dealer for verification of OE reference

  • FORD TRIM FIXINGS

    Standard tolerance on stated size is +-0.2mm Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter Please refer to your vehicle's handbook or main dealer for verification of OE reference

  • GM & OPEL TRIM FIXINGS

    Standard tolerance on stated size is +-0.2mm Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter Please refer to your vehicle's handbook or main dealer for verification of OE reference

  • HONDA / HYUNDAI TRIM...

    Standard tolerance on stated size is +-0.2mm

    Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter

    Please refer to your vehicle's handbook or main dealer for verification of OE reference

  • LANDROVER / MERCEDES...

    Standard tolerance on stated size is +-0.2mm

    Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter

    Please refer to your vehicle's handbook or main dealer for verification of OE reference

  • MAZDA / MITSUBISHI...

    Standard tolerance on stated size is +-0.2mm

    Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter

    Please refer to your vehicle's handbook or main dealer for verification of OE reference

  • NISSAN / TOYOTA TRIM...

    Standard tolerance on stated size is +-0.2mm

    Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter

    Please refer to your vehicle's handbook or main dealer for verification of OE reference

  • SUZUKI / VOLVO TRIM...

    Standard tolerance on stated size is +-0.2mm

    Recommended parts choice should be 0.76 : 1.52mm greater than the hole diameter

    Please refer to your vehicle's handbook or main dealer for verification of OE reference

  • GENERAL PURPOSE
  • WINDSCREEN CLIPS
  • SETS / ASSORTMENTS